Required Components:
Voltage Source (Vsin), Resistor (R), Inductor (L), Capacitor (C), Ground (Gnd) and connecting wires.
Circuit Diagram
Procedure:
Open Schematics.
Go to get new parts, select and place the required components.
Click on draw wire and connect all the elements.
Configure the values of all the placed elements.
Go to analysis setup check transient.
Open transient set print step and step ceiling to 0.1ms, final time to 40ms and print delay to 0s.
Saves the circuit.
Go to analysis and simulate the circuit.
Go to OrCad window Trace Add Trace I(R), V(R).
View the waveform.
Result
